Installing Linux on a Cisco Content Engine
Concept I originally thought about this after reading this article , and soon I set off to install Linux on my Cisco CE560. My first attempts to install using Sarge failed, since Etch is now the current version, and Sarge is now " oldstable ". I was also unable to successfully boot the floppy install of Etch for some reason. Using some of the steps from the aforementioned article, I was able to successfully install Mandrake 10.1 on my content engine. Hardware The Cisco CE560 has the following hardware characteristics : Intel Pentium III 600 MHz 2x512 MB SDRAM Symbios sym53c8xx SCSI controller 2x36GB 80-pin Ultra2 LVD SCSI Hard Drives Asiliant 69000 Video Adapter with 16-pin output header (pinout unknown) 2xIntel 82559 Ethernet Adapters (Linux driver is e100) RJ-45 Serial Console port at 9600,8,N,1 Note: Can only boot from floppy or SCSI! Preparation In order to pull this off, I used the following items: Cisco Console cable A laptop with Windows using Hyperterminal Floppy Dri...