Posts

Showing posts from May, 2011

Nexus 5000 - FWM-2-STM_LOOP_DETECT

In a previous post, I mentioned problems we were having with one of our Nexus 5000 switches. During all of the Nexus 1000v issues, it was throwing these messages continually: 2011 Mar 29 05:22:13 N5K-2 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces 2011 Mar 29 05:22:20 N5K-2 %FWM-2-STM_LOOP_DETECT: Loops detected in the network among ports Eth1/10 and Eth1/2 vlan 801 - Disabling dynamic learn notifications for 180 seconds I couldn't tell if it was actually affecting anything, since VLAN 801 was being used as a FCoE VLAN. Looking at MAC addresses bound to VLAN 801 would reveal one MAC address in particular that would move around: N5K-2(config)# sho mac add vlan 801 Legend: * - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC age - seconds since last seen,+ - primary entry using vPC Peer-Link VLAN MAC Address Type age Secure NTFY Ports ---------+-----------------+--------+---------+------+----+-----------...

More Dell PowerEdge M1000e woes

I previously commented about issues we had with one of the pass through I/O modules with our M1000e chassis. After opening a case with support, they had us do some things such as remove the blades, remove the modules, etc, and it started working. Still not a particularly promising sign. After building out our ESX servers and trying to put VMs on them, we had all kinds of unusual issues with trying to run FCoE Active/Active on them. We were getting errors such as: Apr 23 15:02:04 host vmkernel: 0:00:39:45.582 cpu0:4284)WARNING: LinNet: netdev_watchdog: NETDEV WATCHDOG: vmnic2: transmit timed out Apr 23 15:02:04 host vmkernel: 0:00:39:45.854 cpu3:4260)NMP: nmp_DeviceUpdatePathStates: Activated path "NULL" for NMP device "naa.60060060060060060060060060060060". Apr 23 15:02:04 host vmkernel: 0:00:39:45.854 cpu4:4258)NMP: nmp_DeviceUpdatePathStates: Activated path "NULL" for NMP device "naa.60060060060060060060060060060060". Apr 23 15:02:04 host vmker...